Installation guide

vii
Terminal Server ........................................................................... 7-18
7.6.1 Open Access Server Manager ....................................................... 7-18
7.6.2 Test the Connection...................................................................... 7-20
7.6.3 Configure Access Server Manager................................................ 7-22
7.7 Update Configuration: Modify the Default. config File...................... 7-24
7.7.1 Add Consoles................................................................................. 7-24
7.7.2 Add Groups................................................................................... 7-28
7.8 Cable the Remaining SMC to the Corporate Network........................ 7-30
Part 2 Software Setup
Chapter 8 SMC Definitions
8.1 Set the SMC System Time, Date, and Time Zone................................. 8-2
8.2 Define the SMC’s Network Connections............................................... 8-4
8.2.1 Verify the Computer Name............................................................. 8-4
8.2.2 Verify the Network Protocol ........................................................... 8-6
8.2.3 Define the SMC’s Network Adapter 1............................................. 8-8
8.2.4 Define the SMC’s Network Adapter 2........................................... 8-10
8.2.5 Bind the Protocol .......................................................................... 8-12
8.2.6 Verify the Network Setup............................................................. 8-13
8.3 Configure Outlook Express................................................................. 8-14
Chapter 9 Create or Update Default.config File
9.1 New Installation: Replace the Defauult.config File............................. 9-2
9.2 Upgrade Configuration: Add Group(s) and Console(s) to the
Configuration ........................................................................................ 9-4
9.2.1 Add Consoles................................................................................... 9-4
9.2.2 Add Groups..................................................................................... 9-8
Chapter 10 Run Access Server Software
10.1 Run Access Server Loader to Define Addresses.................................. 10-2
10.1.1 Open Access Server Loader........................................................... 10-2
10.1.2 Create the Database ..................................................................... 10-4
10.1.3 Verify Each Connection ................................................................ 10-6
10.2 Run Access Server Manager to Connect SMC to Each Terminal
Server ................................................................................................ 10-8
10.2.1 Open Access Server Manager ....................................................... 10-8
10.2.2 Test the Connection.................................................................... 10-10
10.2.3 Configure Access Server Manager.............................................. 10-12