Installation guide

4.3 Connect the Network Hub to the SMC ............................................... 4-10
4.4 Cable the SMC to the Corporate Network.......................................... 4-12
Chapter 5 Adding an AS System to Single AS System with SMC
Already Installed
5.1 Cable New AS System to New Terminal Server................................... 5-2
5.1.1 Power New AS System to Vaux ...................................................... 5-2
5.1.2 Cable New AS System to New Terminal Server............................. 5-4
5.1.3 Record the Connections................................................................... 5-6
5.1.4 Dress the Cables.............................................................................5-7
5.2 Disconnect Cable from Old Terminal Server to SMC ........................... 5-8
5.3 Cable New and Old Terminal Servers to Network Hub...................... 5-10
5.4 Connect the Network Hub to the SMC ............................................... 5-12
5.5 Cable the SMC to the Corporate Network.......................................... 5-14
Chapter 6 Adding a System to a Multiple-System
Configuration with One SMC
6.1 Cable New AS System to New Terminal Server................................... 6-2
6.1.1 Power New AS System to Vaux ...................................................... 6-2
6.1.2 Cable New AS System to New Terminal Server............................. 6-4
6.1.3 Record the Connections................................................................... 6-6
6.1.4 Dress the Cables.............................................................................6-7
6.2 Cable New Terminal Server to Network Hub....................................... 6-8
Chapter 7 Consolidating Multi-SMC/AS Configurations to One
SMC
7.1 Choose the SMC to Remain and Add Hub............................................7-2
7.1.1 Cable the AlphaServer System to the Terminal Server (If
Necessary) and the Terminal Server to the Hub............................ 7-2
7.1.2 Connect the Network Hub to the Chosen SMC .............................. 7-4
7.2 Copy Information from SMCs to Be Removed ...................................... 7-6
7.3 Cable Terminal Server to the Network Hub....................................... 7-10
7.4 Create New Address and Name for Terminal Server at
Remaining SMC ........................................................................... 7-12
7.4.1 Open Access Server Loader........................................................... 7-12
7.4.2 Add Consolidated Terminal Server Information to the Database 7-14
7.5 Verify the Connection.......................................................................... 7-16
7.6 Run Access Server Manager to Connect SMC to Each