Installation guide

Cabling the SMC to One System with Multiple Serial Console Lines 3-1
Chapter 3
Cabling the SMC to One System with
Multiple Serial Console Lines
A GS80/160/320 system with multiple console lines has more than one standard
I/O (SIO) module. The SIO modules are in PCI boxes connected to quad building
blocks. On each SIO is the SRM console firmware, which provides a command-
line interface for operator control of the system or a partition.
Sections in this chapter are listed in the box in Figure 3–1.
Figure 3–1 Cabling Procedure Described in This Chapter
Remote Service PC
Modem
Modem
Cable multiple standard
I/O modules to terminal server
MR0206-01
1
1
2
2
3
Cable SMC to
terminal server
Cable SMC to corporate network
GS160 with
four partitions
3
Remote Access
Web Browser
(Corporate LAN
connection allows
remote web access)
(Other systems)