Installation guide

Cabling the SMC to One System with One Console Line 2-1
Chapter 2
Cabling the SMC to One System with
One Console Line
A GS80/160/320 system with a single console line is a system that has only one
standard I/O (SIO) module. The SIO module is in a PCI box connected to a quad
building block, and on it is the SRM console firmware, which provides a
command-line interface for operator control of the system.
Sections in this chapter are listed in the box in Figure 2–1.
Figure 2–1 Cabling Procedure Described in This Chapter
Remote Service PC
Modem
Modem
MR0205-01
1
2
3
2
1
Cable the SMC COM1 port to
to single standard I/O module
in a single AS system
Remote Access
Web Browser
(Corporate LAN
connection allows
remote Web access)
Cable SMC to corporate LAN
3
Check the COM1 port
(Other systems)