Installation guide

Configuring the SMC for Remote Use 12-3
2. Open the Control Panel: From the Start menu select Settings|Control
Panel.
3. Double-click the Modems icon. The Install New Modem dialog box displays.
Click Next. The operating system detects the modem and tests it.
4. The Install New Modem dialog box displays, with the words Standard
Modem in the box. Click the Change… button. Click the Have Disk…
button. Insert the disk that came with the modem in the appropriate drive.
5. In the dialog box click the Browse button, and select the drive and file.
Select the modem type.
6. Check that the Modem Properties box (Figure 12–2) displays, indicating
that the modem has installed correctly.
Figure 12–2 Modem Detected