Installation guide

Validating Console Groups 11-13
Figure 11–8 shows the display after the user has clicked the “Save All” box on
the CGValidator screen. A window is displayed showing the information on
disabled and enabled groups and requesting confirmation for the save. You can
select “OK,” which will save the data to the GPD. In this case, only group GS80
can be partitioned using CAPM. If you select “Cancel” you return to working
with groups using CGValidator.
NEXT STEP: If you are planning to access the SMC remotely, go to Chapter 12.
Otherwise, you are finished with the installation.
.