Installation guide

Validating Console Groups 11-7
In the example in Figure 11–4, the user has selected GS80 for review (shown
by dashed lines around the group name).
Data for the system connected to this terminal server is displayed clearly,
because it has been selected as a group (checked box).
Figure 11–5 shows saving the enabled group in Figure 11–4 as part of the
Group Parameter Data maintained by ConsoleWorks by clicking on the “Save
GPD” box at the bottom of the screen. CGValidator displays a message saying
that the data has been saved. As an enabled, valid group, the user will be able
to partition the group with CAPM.
Figure 11–5 Saving an Enabled Group to the GPD