Installation guide

Validating Console Groups 11-5
CGValidator examines the groups defined in ConsoleWorks and compares them
with the systems connected to the SMC. It displays the group names it finds.
ItcantaketimetolocateallthesystemsconnectedtotheSMC;CGValidator
displays a “waiting” message in the status field in the window until all groups
have been located and verified.
The checkboxes next to the group names indicate that CGValidator has verified
that all the consoles in the group are connected to the same AlphaServer
GS80/160/320 system.
In Figure 11–3, the two boxes are checked. This means that CGValidator has
been run previously and these groups were selected and their data saved. In a
newconfiguration,theboxeswouldbeunchecked.
The checkbox is provided so that you can click on it to select it for partitioning
by the CAPM utility (see the SCM User’s Guide for details). Note that you may
see some names without checkboxes; these indicate that the console lines in the
group are not connected to the same system. This can happen if the group is a
cluster of two or more systems. Or, it can indicate that a console line has been
connected to the wrong system.