Installation guide

Run Access Server Software 10-13
1. From the Utilities tab of the Access Server dialog box (Figure 10–8), select
Run Command File.
2. Click the Do It Now… button. The Select a Command File dialog box
displays (Figure 10–10).
3. Select the file GS_CON.cmds. Click Open. The Run Command File dialog
box displays (Figure 10–11). Click OK. The command file runs.
4. Close the Access Server dialog box and return to Access Server Manager.
5. Close Access Server Manager.
Figure 10–11 Run Command File Dialog Box
NEXT STEP: Go to Chapter 11.