Installation guide

Run Access Server Software 10-5
1. The Access Server Loader Configuration dialog box displays (Figure 10–3).
On the Clients tab, enter the following information:
Host Name: Name for each terminal server (GSSMC1, GSSMC2, …)
Hardware Addr: from the label on each terminal server (
in Figure 10–4)
IP Addr: 90.0.0.x
1
Subnet Mask: 255.255.255.0
NOTE: The IP address you enter in the Access Server Loader Configuration
dialog box is the IP address for the terminal server, not for the host.
2. Click OK. The Access Server Loader window displays.
Figure 10–4 Location of Hardware Address Label on Terminal Server
PK-1783-00
0
0
-
6
0
-
6
D
-
9
3
-
5
7
-
C
0
1
1
The value of x consists of odd numbers, beginning with 1 for the terminal
server for the first AlphaServer GS80/160/320 system, 3 for the terminal server
for the second AlphaServer GS80/160/320 system, and so on, up to 99. (Even
numbers are reserved for future expansion.)