Installation guide

Consolidating Multi-SMC/AS Configurations to One SMC 7-15
1. The Access Server Loader Configuration dialog box displays (Figure 7–14).
On the Clients tab, enter new and old information for the terminal server
being replaced:
Host Name: Name for each terminal server (GSSMC1, GSSMC2,…)
Hardware Addr: from the label on each terminal server (Figure 7–9).
IP Addr: 90.0.0.x
2
Subnet Mask: 255.255.255.0
NOTE: The IP address you enter in the dialog box is the IP address for the
terminal server, not the host.
2. Click OK. The Access Server Loader window displays.
2
The value of x consists of odd numbers beginning with 1 for the terminal
server for the first AlphaServer, 3 for the terminal server for the second
AlphaServer, and so on, up to 99. (Even numbers are reserved for future
expansion.)