Service manual

2-6 AlphaServer GS160/320 CPU Addition and Removal
2.3 OpenVMS Procedure
For more information, refer to OpenVMS Version 7.3 New Features
Manual.
Example 2–2 Replacing a CPU Module
$ STOP/CPU 3
%SYSTEM-I-CPUSTOPPING, trying to stop CPU 3 after it reaches quiescent state
$ SET CPU/POWER=OFF 3
%SYSTEM-I-CPUSELECTED, a selected CPU is attempting the requested transition
$SHOCPU
WFSI27, a Compaq AlphaServer GS160 6/1001
Multiprocessing is ENABLED. Streamlined synchronization image loaded.
Primary CPU = 000
CPU sets:
Active 0-2,4-7
Configure 0-7
Powered Down 3
Potential 0-2,4-15
Autostart 0-31
Failover None
$
[Remove the CPU; insert another CPU]
CPU3 removed from QBB0
CPU3 added to QBB0
$ SET CPU/POWER=ON 3
%SYSTEM-I-CPUSELECTED, a selected CPU is attempting the requested transition
$
QBB0 now Testing Step-0...........
~I~ QBB0/PSM30 SysEvent: CPU_SYNC_INIT Reg0:768F Reg1:3FFF
~I~ QBB0/PSM30 SysEvent: CPU_PINIT_DONE Reg0:768F Reg1:3FFF