Specifications

AIT Drive Reference Guide 5–1
5
Troubleshooting the AIT Drive
Eliminating Resource Conflicts
Many of the problems associated with tape drive installation are a result of resource
conflicts between the tape drive components and the other components in the
computer.
Before following the troubleshooting procedures in this guide, complete the system
configuration worksheet (see Table 5-1). Use the worksheet to identify and correct
resource conflicts.
Completing the System Configuration Worksheet
1. Run the Compaq System Configuration Utility and select Step 4.
2. Record the switch settings for all option boards on the worksheet (see Table 5-1)
under Recommended Switch Settings.
3. Remove the computer cover and record the actual switch settings from all option
boards under Actual Option Board Switch Settings.
4. Compare the settings recorded on the worksheet. If there are any differences, set
the board switches as recommended by the Compaq System Configuration Utility.