Specifications

AIT Drive Reference Guide 2–7
Installing the Software Drivers
Refer to the documentation accompanying the Compaq Support Software for SCO
UnixWare, versions 2.x to 7.x., Compaq EFS 2.2x for UnixWare 2.1, or Compaq EFS
7.2x for UnixWare 7.x. The required driver is CPQSC.
EFS for SCO UnixWare is available on the Compaq SmartStart for Servers CD. The
Compaq EFS for SCO UNIX is installed and configured automatically during a
SmartStart installation.
The Support Software ships with each computer or it can be downloaded from the
Compaq website.
Sun Solaris Intel Platform Edition
The table below provides information on identifying appropriate drivers for Compaq
SCSI controllers.
Table 2–2: Sun Solaris
Controller Software Driver Information
32-Bit Fast SCSI-2
32-Bit Fast-Wide SCSI-2
Wide-Ultra SCSI-3
64-Bit Dual Channel Wide Ultra-2 SCSI
For Solaris 2.6, 7, and 8, refer to the
Solaris documentation. The Compaq
Solaris driver updates can be
downloaded from the Compaq website.
The required driver is CPQNCR.
64-Bit/66-MHz Single Channel Wide
Ultra3
64-Bit/66-MHz Dual Channel Wide
Ultra3
For Solaris 7 and 8, refer to the Solaris
documentation. The Solaris driver can
be downloaded from the Compaq
website or the Adaptec website. The
required driver is CADP160.