QuickSpecs
NOTE:
For the Standard Features shipped in the Factory Integrated Models, please see the "Configuration Information - Factory
Integrated Models" section.
Processor
One of the following
depending on Model
Quad-Core Processors
Intel® Xeon® Processor E5540 (2.53 GHz, 8MB L3 Cache, 80W, DDR3-1066, HT, Turbo 1/1/2/2)
Intel® Xeon® Processor E5520 (2.26 GHz, 8MB L3 Cache, 80W, DDR3-1066, HT, Turbo 1/1/2/2)
Intel® Xeon® Processor L5520 (2.26 GHz, 8MB L3 Cache, 60W, DDR3-1066, HT, Turbo 1/1/2/2)
Intel® Xeon® Processor E5504 (2.00 GHz, 4MB L3 Cache, 80W, DDR3-800)
NOTE:
HT indicates that the processor model supports Intel® Hyper-Threading Technology.
NOTE:
Turbo indicates the maximum potential frequency increment when using Intel® Turbo Boost
Technology, with 4, 3, 2, and 1 cores active.
NOTE:
DDR3 speed is the maximum memory speed of the processor. Actual memory speed may depend
on the quantity and type of DIMMs installed.
NOTE:
For the Intel 5500 Series, the letter preceding the model number indicates the
performance/wattage of the processor. "X" denotes High Performance/Wattage; "E" denotes Enterprise
Performance/Wattage (Mainstream); and "L" denotes Lower Wattage.
Upgradeability
Upgradeable to two processors
Chipset
Intel® 5520 Chipset
NOTE:
For more information regarding Intel chipsets, please see the following URL:
http://www.intel.com/products/server/chipsets/
.
Cache Memory
4 MB Level 3 cache (E5504)
8 MB Level 3 cache (L5520, E5520, E5540)
Memory Protection
Advanced memory protection
Memory
Type
DDR3 Registered (RDIMM) or Unbuffered (UDIMM)
Standard
4 GB
(2 x 2 GB)
6 GB
(3 x 2 GB)
12 GB
(6 x 2 GB)
Maximum (RDIMM)
192 GB
(12 x 16 GB)
Maximum (UDIMM)
24 GB
(12 x2 GB)
NOTE:
Depending on the memory configuration and processor model, the memory speed may run at
1333MHz, 1066MHz, or 800MHz. Please see the Online Memory Configuration Tool at:
www.hp.com/go/ddr3memory-configurator
.
DDR3 memory options part number decoder
QuickSpecs
HP ProLiant DL180 Generation 6
Standard Features
DA - 13248 Worldwide QuickSpecs — Version 12 — 11.25.2009
Page 5