Installation guide

5-8 Compaq ProLiant 6400R Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Gilbert Saldivar Project: Compaq ProLiant 6400R Setup and Installation Guide Comments:
Part Number: 388776-002 File Name: f-ch05 PCI Hot Plug Technology Last Saved On: 3/17/00 12:46 PM
Novell intraNetWare Operating System
Messages
Adapter Not Same – Adapter is not the same as the adapter being replaced.
Hot-plug replacement cannot continue.
Card Functioning – Adapter in slot is currently functioning. Add/Replace is
ignored.
Driver in Use – Adapter is currently in use. Do you wish to force removal?
Driver Loaded – Driver for adapter is currently loaded. Unload driver and
select again.
General Failure – Could not perform action because of system failure.
No Hot-Plug Driver – Hot-plug driver is not responding. Check to make sure the
hot-plug driver is loaded.
Remove Not Supt – Remove action is not supported for the adapter/slot.
Switch Open – Slot cannot be initialized because the switch is open. Close the
switch and try Add/Replace again.
Unknown Slot – Add/Remove performed on an unknown slot. Try the
command again.
Replace Load Driver – Adapter successfully replaced. Please load driver at this
time.
See the online PCI Hot Plug Administration Guide on the Documentation CD
for more information on troubleshooting and error messages.