Installation guide

PCI Hot Plug Technology 5-5
Compaq Confidential – Need to Know Required
Writer: Gilbert Saldivar Project: Compaq ProLiant 6400R Setup and Installation Guide Comments:
Part Number: 388776-002 File Name: f-ch05 PCI Hot Plug Technology Last Saved On: 3/17/00 12:46 PM
Table 5-1
PCI Hot Plug LEDs
continued
LED Power Status OK to Open Slot Status
Green
Amber
Flashing
On
No Power slot is being turned off or on which may
take several minutes. A problem may exist
with the slot, the PCI board, or the driver. Do
not open the slot release lever until the green
LED is off.
Green
Amber
Off
On
No Power to this slot is turned off but this slot
requires attention. A problem may exist with
the slot, board, or driver.
1. Open the slot release lever. The amber
LED turns off.
2. Remove or replace the board.
3. Connect the cables to the PCI board.
4. Close the slot release lever.
5. Return power to the slot through the PCI
Hot Plug application. The green LED turns
on.
Green
Amber
Off
Off
Yes The power to the slot is off. If you need to
replace the card in this slot, follow these steps:
1 Open the slot release lever.
2. Remove or replace the board.
3. Connect the cables to the PCI board.
4. Close the slot release lever.
5. Return power to the slot through the PCI
Hot Plug application. The green LED turns
on.
PCI Hot Plug Application Support
In partnership with Microsoft and Novell, Compaq has developed software
support implementations for each company’s operating system. For SCO
support, check the Compaq website:
www.compaq.com