Installation guide

5-4 Compaq ProLiant 6400R Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Gilbert Saldivar Project: Compaq ProLiant 6400R Setup and Installation Guide Comments:
Part Number: 388776-002 File Name: f-ch05 PCI Hot Plug Technology Last Saved On: 3/17/00 12:46 PM
Table 5-1
PCI Hot Plug LEDs
LED Power Status OK to Open Slot Status
Green
Amber
On
Off
No Power is currently applied to the slot. Do not
open the slot release lever. The slot is
functioning normally.
Green
Amber
On
On
No Power is currently applied to this slot but the
slot requires attention for a possible problem
with the slot, board or driver. Do not open the
slot release lever. Follow these steps:
1. Through the PCI Hot Plug application, turn
power off to the slot. The green LED turns
off.
2. Open the slot release lever. The amber
LED turns off.
3. Remove or replace the board.
4. Connect the cables to the PCI board.
5. Close the slot release lever.
6. Return power to the slot through the PCI
Hot Plug application. The green LED turns
on.
continued