Installation guide

Installing Hardware Options 3-31
Compaq Confidential – Need to Know Required
Writer: Gilbert Saldivar Project: Compaq ProLiant 6400R Setup and Installation Guide Comments:
Part Number: 388776-002 File Name: d-ch03 Installing Hardware Options Last Saved On: 3/20/00 12:17 PM
Removing Hot-Plug Fans
WARNING: To reduce the risk of personal injury from hazardous energy or
damage to the equipment when working on energized servers.
■ Remove all watches, rings, and any other loosely fitting jewelry.
■ Avoid the use of conductive tools that could bridge live parts inside the
server.
1. Pull the locking latch toward the center of the fan .
2. Lift the hot-plug fan out of the fan cage .
2
1
Figure 3-27. Removing a hot-plug fan
Installing a Hot-Plug Fan
WARNING: To reduce the risk of personal injury from hazardous energy or
damage to the equipment when working on energized servers:
■ Remove all watches, rings, and any other loosely fitting jewelry.
■ Avoid the use of conductive tools that could bridge live parts inside the
server.
1. Lower the new hot-plug fan into the fan cage , until it clicks in place.
2. Secure the fan by tightening thumbscrew or thumbscrews finger-tight.