Installation guide

Installing Hardware Options 3-27
Compaq Confidential – Need to Know Required
Writer: Gilbert Saldivar Project: Compaq ProLiant 6400R Setup and Installation Guide Comments:
Part Number: 388776-002 File Name: d-ch03 Installing Hardware Options Last Saved On: 3/20/00 12:17 PM
Power Supply LEDs
For power supply status, note the color of the power supply LEDs, located on
the front of the power supply.
Table 3-8
Hot-Plug Power Supply LEDs
LED Location Indicator Description
Bottom Green AC present
Bottom Off AC not present or fault
Top Green Power Supply OK
Top Off Fault
Removing a Hot-Plug Power Supply
1. Grasp the power supply handle and press up on the thumb latch .
2. Pull the power supply out .
A
B
2
1
1
Figure 3-24. Removing a hot-plug power supply
If you remove and replace a power supply in a redundant hot-plug power
supply configuration while the system is operating, follow these instructions to
prevent a false notification. After removing the hot-plug power supply, wait
for at least 6 seconds before inserting the replacement power supply.