Installation guide

Installing Hardware Options 3-17
Compaq Confidential – Need to Know Required
Writer: Gilbert Saldivar Project: Compaq ProLiant 6400R Setup and Installation Guide Comments:
Part Number: 388776-002 File Name: d-ch03 Installing Hardware Options Last Saved On: 3/20/00 12:17 PM
Removing the Peripheral Board
Remove the peripheral board by loosening the thumbscrews , rotating the
release latches outward to 30 degrees
, and pulling the board up out of the
socket
.
CAUTION: Do not pull the release latches to a full 90 degrees because the
levers will break.
3
2
2
1
1
Figure 3-15. Removing the peripheral board
Hot-Plug Areas
This section describes access to the following areas:
■ PCI Hot Plug expansion boards. For operation information, see
Chapter 5, “PCI Hot Plug Technology.”
■ Hot-plug SCSI drives
■ Hot-plug power supplies
■ Hot-plug fans
Components in these areas have port-colored latches or levers to signify that
they are hot-plug devices.