Installation guide

Rack-Mountable Server Installation 2-17
Compaq Confidential – Need to Know Required
Writer: Gilbert Saldivar Project: Compaq ProLiant 6400R Setup and Installation Guide Comments:
Part Number: 388776-002 File Name: c-ch02 Rack-Mountable Server Installation Last Saved On: 3/17/00 1:41 PM
CZR4-012.eps
Figure 2-7. Back of mounting bracket assembly installed
4. Using the pencil marks, attach the rack mounting bracket assembly to
the front rail of the rack using one M6 by 12-mm Phillips screw in the
bottom hole of the bracket. Do not use washers.
IMPORTANT: Place one screw in the bottom hole of the bracket.
NOTE: The tabs on the front of the rack mounting bracket help to align it with the front of
the frame.
Figure 2-8. Attaching rack mounting bracket assembly to the front of the rack
5. After attaching both of the mounting bracket assemblies to the rack,
prepare the server for mounting.