Installation guide

Rack-Mountable Server Installation 2-13

Compaq Confidential – Need to Know Required

Writer: Gilbert Saldivar Project: Compaq ProLiant 6400R Setup and Installation Guide Comments:

Part Number: 388776-002 File Name: c-ch02 Rack-Mountable Server Installation Last Saved On: 3/17/00 1:41 PM

3. Extend the inner slide rail from the front of the bracket rail. With this

piece extended, you can see three screw holes aligned in the rack

mounting bracket and the slide rail assemblies.

4. Fasten the slide rail assemblies to the rack mounting bracket with three

8/32 x ¼-inch slotted screws.

IMPORTANT: Do not use nuts or washers with the screws.

Figure 2-4. Attaching the bracket rail to the rack mounting bracket

5. Adjust the inner slide to access the other two screw holes, one at a time,

through the slotted opening in the inner slide. Use two more 8/32 by

¼-inch slotted screws to fasten the bracket rail to the rack mounting

bracket.

6. Repeat steps 3 through 5 with the other bracket rail and rack mounting

bracket. You now have a pair of mounting bracket slide assemblies to be

attached to the rack.