Installation guide

1-4 Compaq ProLiant 6400R Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Gilbert Saldivar Project: Compaq ProLiant 6400R Setup and Installation Guide Comments:
Part Number: 388776-002 File Name: b-ch01 Server Features Last Saved On: 3/20/00 3:07 PM
Internal Drive Bays
Internal 1-Inch Wide Ultra2 SCSI
Hot-Plug Drive Bays
The Compaq ProLiant 6400R server supports one SCSI hard-drive cage that
can be configured with up to four 1-inch standard hot-plug Wide Ultra2 SCSI
hard drives. Drives can be of any storage capacity but must be mounted on
Compaq hot-plug drive trays.
Internal Removable Media Drive Bays
■ Pre-installed high speed, low profile IDE CD-ROM drive
■ Pre-installed 1.44-MB 3.5-inch diskette drive
Power Supplies
■ One hot-plug power supply (450 W at 220/110 V), standard
■ Redundant hot-plug power supplies provide load balancing, an
additional level of availability (optional)
Hot-Plug Power Supply Advanced Features
■ Auto Line Sensing capability. No switch is needed to select the
appropriate line voltage.
■ Power Down Manager
These utilities are provided on the Compaq Support Software for Microsoft
Windows NT 4.0 diskettes (NTSSD). For more detailed information, see the
NTREADME.HLP file on Diskette 1. Future operating system support is
planned for later release.
System Power Supplies Management Guidelines
Use the following guidelines when evaluating these tradeoffs.
NOTE: The following guidelines are general. Use the Power Supply Viewer Utility and
option documents to obtain the most accurate power capacity and assessment of power
margin.