Installation guide

LED Indicators D-7
Compaq Confidential – Need to Know Required
Writer: Gilbert Saldivar Project: Compaq ProLiant 6400R Setup and Installation Guide Comments:
Part Number: 388776-002 File Name: l-appd LED Indicators Last Saved On: 3/17/00 4:48 PM
Table D-6
PCI Hot Plug LEDs
continued
LED Power Status OK to Open Slot Status
Green
Amber
Off
Off
Yes The power to the slot is off. If you need to
replace the card in this slot, follow these steps:
1. Open the slot release lever.
2. Remove or replace the board.
3. Connect the cables to the PCI board.
4. Close the slot release lever.
5. Return power to the slot through the PCI Hot
Plug application. The green LED turns on.
The PCI Hot Plug LEDs at each expansion slot provide a visual reference of
the status of each board slot. The LEDs are viewed from the rear of the server
or by opening the PCI Hot Plug access doors on the top panel. The figure
below shows the PCI Hot Plug LEDs as viewed from the rear of the server.
1
2
Figure D-4. PCI Hot Plug LED indicators, the green LED and the amber LED
from the rear of the server
CAUTION: Do not open the slot release lever unless the slot’s green PCI Hot
Plug LED indicator is off. A system power down and subsequent data loss could
occur.