Installation guide

D-2 Compaq ProLiant 6400R Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Gilbert Saldivar Project: Compaq ProLiant 6400R Setup and Installation Guide Comments:
Part Number: 388776-002 File Name: l-appd LED Indicators Last Saved On: 3/17/00 4:48 PM
Table D-1
Front Panel LEDs
LED Description Indicator Status
Power Green
Amber
System power on
Standby
Interlock
system
Green
Amber
Interlock status OK
Interlock failure, refer to system board
LEDs
Fan Green
Amber
All fans operational
One or more fans failed
System Board Interlock LED Indicators
IMPORTANT: This server is not equipped with chassis interlocks; however, board
interlocks are provided that connect the memory board, all processors, the peripheral
board, the miscellaneous cable and the power switch cable in one interlock chain.
When a component in the interlock chain is improperly seated in its connector,
the LED associated with the fault origination point will illuminate on the
system board. A general interlock fault LED located second from the left of
the Power On/Standby switch, or center LED on the front of the server will
indicate when any of the system board interlock LEDs are amber.
If the front panel interlock LED is amber, open the top access panel to identify
which device is causing the failure. The table below will give the meaning of
the System Board Interlock LED status.
Table D-2
System Board Interlock LED Status
LED Indication Status
Off Interlock operational
Amber Interlock failure