Installation guide

C-2 Compaq ProLiant 6400R Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Gilbert Saldivar Project: Compaq ProLiant 6400R Setup and Installation Guide Comments:
Part Number: 388776-002 File Name: k-appc Switch Settings Last Saved On: 3/17/00 1:41 PM
Core Frequency Switch (SW2 and SW3)
For the location of the core frequency switch (SW2 and SW3), see the hood
label under the top access panel of the server. The table below describes the
core frequency switch (SW2 and SW3) positions for the processors:
Table C-2
Core Frequency Switch (SW2 and SW3)
Switch Position Core Frequency
S1 S2 S3 S4 Processor (MHz)
Off On Off On 450
On On Off Off 500
Off On Off Off 550
NOTE: SW2 applies to processors 1 and 2; SW3 applies to processors 3 and 4. The off
position indicates a switch is open.
NOTE: Compaq makes no representation or warranty that processors, which operate at any
of the speeds shown, will be available at any time. Therefore, processor core speeds shown
are not necessarily representative of future processors.