User guide

Installation
HP TFT5600 Rackmount Keyboard and Monitor (RKM) User Guide 2-3
CONFIDENTIAL
Writer: Amy Laffitte - John Turner File Name: c-ch2 Installation
Codename: RUGER Part Number: 229719-003 Last Saved On: 8/16/02 1:43 PM
2. Install the mounting rails with slides.
a. Insert one cage nut (1) into the hole marked with the rack template on the
rear of the rack.
b. Hook the tabs on the mounting rail into the appropriate holes on the rear of
the rack, and insert one screw (2).
IMPORTANT: Be sure to align the front screw holes when attaching the mounting rail to
the rear of the rack.
c. Insert two M-6 screws into the holes at the front of the rack, and then
tighten (3).
d. Repeat steps 2a through 2c to install the other mounting rail.
2
1
3
Figure 2-2: Installing mounting rails to the rear and
front of the rack