Specifications

2-4 Compaq ProLiant 5500 and 5500R Maintenance and Service Guide
For use with Pentium II and Pentium III Xeon processor-based servers only
WARNING: To reduce the risk of electric shock or damage to the equipment:
■ Do not disable the power cord grounding plug. The grounding plug is an important safety
feature.
■ Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all
times.
■ Install the power supply before connecting the power cord to the power supply.
■ Unplug the power cord before removing the power supply from the server.
■ If the system has multiple power supplies, disconnect power from the system by
unplugging all power cords from the power supplies.
CAUTION: Electrostatic discharge can damage electronic components. Be sure you are
properly grounded before beginning any installation procedure. Refer to the section titled
“Electrostatic Discharge” for more information.
Rack Warnings
WARNING: To reduce the risk of personal injury or damage to the equipment, be sure that:
■ The leveling jacks are extended to the floor
■ The full weight of the rack rests on the leveling jacks
■ The stabilizers are attached to the rack and are fully extended if it is a single rack
installation
■ Multiple racks are coupled together in multiple-rack installations
■ No more than one component is extended at a time
■ The heaviest item is loaded first and at the bottom of the rack
■ The equipment is properly supported/braced when installing options and cards
WARNING: To reduce the risk of personal injury, fire, or damage to the equipment, do not
overload the AC supply branch circuit that provides power to the rack.