Specifications

14 Compaq ProLiant 5500 and 5500R Maintenance and Service Guide
For use with Pentium II and Pentium III Xeon processor-based servers only
power switch and cable 1-4
processor power module 1-5
Processor Terminator Board 1-5
processor w/heat sink 1-4
rack conversion kit 1-5
removable media blank
bezel 1-5
return kit 1-5
SCSI adapter 1-6
signal cable kit 1-5
slot cover kit 1-5
Smart Array 3200 controller 1-6
System I/O Board w/tray 1-5
Ultra2 SCSI Simplex SCSI
Backplane Board w/drive
cage 1-4
Wide Ultra SCSI Backplane
Board 1-4
Wide Ultra2 SCSI Adapter 1-4
parts
handling 2-1
transporting 2-1
password
disabling 4-7
enabling 4-7
switch settings, defined 4-7
PCI
boards, configuring 3-3
slots, identifying 2-36
slots, illustrated 4-4
Peripheral Board
components, identified 4-6
components, illustrated 4-6
configuration switches 4-7
connector, identified 2-21
connector, illustrated 4-4
external battery connector,
illustrated 4-6
fan cable assembly connector,
illustrated 4-6
IMD connector, illustrated 4-6
internal battery jumper,
location 4-6
internal battery, location 4-6
keyboard connector 4-6
location, illustrated 2-21
mouse connector, illustrated 4-6
parallel port connector 4-6
part number 1-4
power switch connector 4-6
removing 2-30
removing cables from,
illustrated 2-30
removing, illustrated 2-31
replacing 2-31
SCSI Port connectors,
illustrated 4-6
serial A connector,
illustrated 4-6
serial B connector,
illustrated 4-6
switches, illustrated 4-7
switches, settings defined 4-7
system configuration switch,
illustrated 4-6
video connector, illustrated 4-6
physical specifications 5-1
plastics kit, part number 1-5
pointing device interface, test error
codes 3-35
POST
beeps, description 3-8
defined 3-7
error messages 3-7, 3-8
operations, viewing x
power
backplane board
removing 2-41
removing, illustrated 2-41
replacing 2-41
cable kit, part number 1-5
disconnecting from system 2-3
interlock system, described 4-8
logic cable assembly, part
number 1-5
Power Backplane Board, part
number 1-4
power module
connector, illustrated 4-4
locations of 2-26
locations, illustrated 2-26
power supply
cover plate
removing 2-40
removing, illustrated 2-40
replacing 2-40
LED indicators 2-38
LED indicators, illustrated 2-38
outlet, identified 4-3
part number 1-4
redundant configuration
information 2-39
removing 2-39
removing, illustrated 2-39
replacing 2-39
signal connector, illustrated 4-5
power switch
connector, illustrated 4-6
part number 1-4
removing 2-25