Specifications
Table Of Contents
- Compaq ProLiant 5500 and 5500R Maintenance and Service Guide
- Notice
- Contents
- About This Guide
- Chapter 1: Illustrated Parts Catalog
- Chapter 2: Removal and Replacement Procedures
- Electrostatic Discharge Information
- Symbols in Equipment
- Preparation Procedures
- Caster Mounting Plate (Tower)
- Front Bezel Door (Tower)
- Fixed Front Bezel
- Side Access Panel
- Top Access Panel
- U-Channel Access Panel
- Fans
- Media Storage
- SCSI and CD-ROM Cable Connection Diagram
- Integrated Management Display (IMD)
- Power Switch with LED
- Processor, Processor Power Module, and Terminator Board Locations
- Processor Removal
- Processor Power Module
- Processor Terminator Modules
- Peripheral Board
- Memory
- 64-bit Dual Channel Wide Ultra2 SCSI Adapter
- Network Interface Controller (NIC)
- Hot-Plug Power Supply LED Indicators
- Hot-Plug Power Supply Cover Plate
- Power Backplane Board
- System I/O Board with Tray
- External Replacement Battery
- Chapter 3: Diagnostic Tools
- Diagnostic Tools Utility Overview
- Default Configuration
- Utilities Access
- Power-On Self-Test (POST)
- Diagnostics Software
- Steps for Diagnostics
- 100 – 199, Primary Processor Test Error Codes
- 200 – 299, Memory Test Error Codes
- 300 – 399, Keyboard Test Error Codes
- 400 – 499, Parallel Printer Test Error Codes
- 500 – 599, Video Display Unit Test Error Codes
- 600 – 699, Diskette Drive Test Error Codes
- 800 – 899, Monochrome Video Board Test Error Codes
- 1100 – 1199, Serial Test Error Codes
- 1200 – 1299, Modem Communications Test Error Codes
- 1700 – 1799, Hard Drive Test Error Codes
- 1900 – 1999, Tape Drive Test Error Codes
- 2400 – 2499, Advanced VGA Board Test Error Codes
- 6000 – 6099, Compaq Network Interface Controller Boards Test€Error Codes
- 6500 – 6599, SCSI Hard drive Test Error Codes
- 6600 – 6699, SCSI/IDE CD-ROM Drive Test Error Codes
- 6700 – 6799, SCSI Tape Drive Test Error Codes
- 7000 – 7099, Server Manager/R Board Test Error Codes
- 8600 – 8699, Pointing Device Interface Test Error Codes
- Array Diagnostic Utility (ADU)
- Integrated Management Log
- Rapid Error Recovery
- Remote Service Features
- ROMPaq Error Recovery Options
- Compaq Insight Manager
- Chapter 4: Connectors, Switches, LEDs, and Jumpers
- Chapter 5: Physical and Operating Specifications
- System Unit
- Dual Inline Memory Modules (DIMMs)
- 1.44-MB Diskette Drive
- 24X or Greater IDE CD-ROM Drive
- Integrated Dual-Channel Wide Ultra SCSI Controller
- 64-bit Dual Channel Wide Ultra2 SCSI Adapter
- Smart Array 3200 Controller
- Compaq 10/100 TX PCI Intel UTP Controller (NIC)
- Compaq 10/100 TX PCI UTP Controller (NIC)
- Non-Hot-Plug Ultra2 Hard Drives
- Non-Hot-Plug Wide-Ultra Hard Drives
- Hot Plug Ultra2 Hard Drives
- Hot-Plug Wide-Ultra Hard Drives
- Index
12 Compaq ProLiant 5500 and 5500R Maintenance and Service Guide
For use with Pentium II and Pentium III Xeon processor-based servers only
Inspect utility
accessing 3-2
booting remotely 3-59
description 3-2, 3-4
printing Inspect listing 3-4
running 3-4
Integrated Management Display See
IMD
Integrated Management Log See
IML
Integrated Remote Console
features 3-55
integrated server management,
features 3-51
interlock system
determining system fault 4-8
identifying board interlocks 4-8
LED error indicators,
illustrated 4-8
IP access 3-57
IP/IPX, using network features 3-53
IRQ conflict, resolving 3-3
ISA slots, illustrated 4-4
J
jumpers, battery 4-6
K
keyboard
connector, identified 4-3
connector, illustrated 4-6
part number 1-6
test error codes 3-24
L
LCD backplane adapter cable, part
number 1-5
LCD firmware revision, viewing x
LEDs
power supply 2-38
power supply, illustrated 2-38
system interlock
description 4-8
determining system
fault 4-8
illustrated 4-8
using to determine faulty
device 4-8
log
Critical Error 3-61
Integrated Management 3-61
Server Health 3-61
viewing 3-61
M
Maintenance and Service Guide, part
number 1-5
maintenance switch, settings
defined 4-7
mechanical parts, exploded view 1-2
media storage devices, location 2-14
memory
DIMM installation order 2-32
DIMM upgrade
combinations 2-33
location, identified 2-32
maximum supported 2-32
removing 2-32, 2-35
removing, illustrated 2-35
replacing 2-35
specifications 5-3
type supported 2-32
upgrade requirements 5-3
memory banks, DIMM installation
order 2-32
memory board
connector, illustrated 4-5
part number 1-5
removing 2-34
removing, illustrated 2-34
replacing 2-34
memory errors, recorded to log 3-61
memory module, part number 1-5,
1-6
miscellaneous
plastics kit 1-5
power cable kit, part
number 1-5
processor guides 1-5
signal cable kit 1-5
slot cover kit, part number 1-5
model number, viewing x
modem
test error codes 3-28
when used with ASR-2 3-53
monochrome video board, test error
codes 3-27
mouse connector
identified 4-3
illustrated 4-6
N
Netelligent 10/100 TX PCI UTP
controller
specifications 5-8
Netelligent Management,
defined 3-67










