Specifications

8 Compaq ProLiant 5500 and 5500R Maintenance and Service Guide
For use with Pentium II and Pentium III Xeon processor-based servers only
drive (bay)
drive X failed 3-41
drive X inadvertently
replaced 3-41
firmware needs
upgrading 3-40
insufficient capacity 3-40
invalid M&P stamp 3-40
loose cable 3-40
needs replacing 3-41
replacement drive 3-40
replacement drive marked
OK 3-41
undergoing drive
recovery 3-41
upload code not
readable 3-41
drive monitoring
features unobtainable 3-41
not enabled 3-41
drive time-out 3-41
drive X indicates position
Y 3-41
duplicate write memory
error 3-41
Error Detected On Boot
Up 3-62
error occurred reading RIS
copy 3-42
fan
failure 3-49
inserted 3-49
not redundant 3-49
removed 3-49
Fatal ROM Error 3-8
FYI, drive (bay) X is non-
Compaq supplied 3-42
host bus error 3-50
identify controller data did not
match NVRAM 3-42
identify logical drive data did not
match NVRAM 3-42
insufficient adapter
resources 3-42
logical drive X
failed due to cache
error 3-42
status = FAILED 3-43
status = INTERIM
RECOVERY 3-43
status = LOOSE CABLE
DETECTED 3-43
status = NEEDS
RECOVER 3-43
status =
OVERHEATED 3-43
status =
OVERHEATING 3-43
status =
RECOVERING 3-43
status = WRONG DRIVE
REPLACED 3-43
loose cable detected
logical drives may be
marked FAILED 3-43,
3-44
mirror data miscompare 3-44
NMI
Automatic Server Recovery
Timer Expiration 3-62
Expansion Board
Error 3-62
Expansion Bus Master
Time-Out 3-62
Expansion Bus Slave Time-
Out 3-62
Fail-Safe Timer
Expiration 3-62
PCI Bus Parity Error 3-62
Processor Parity Error 3-62
Software Generated
Interrupt Detected
Error 3-62
no configuration for Accelerator
board 3-44
NVRAM configuration present,
controller not detected 3-44
overheat condition 3-49
power AC overload 3-50
power module
failure 3-50
not redundant 3-50
power supply
failure 3-50
inserted 3-50
not redundant 3-50
removed 3-50