Technical data

disk enclosures
model 4314R
, 1-2
model 4354R, 1-2
disklabel command, 4-32
disks
available for software installation
,
4-27
maximum number, 1-2
number of, 1-2
E
Ethernet switch
10Base-T Ethernet connection
, 4-2
F
fabric mode
, 4-3
failure to boot
, 4-5
ffauto console environment
variable
, 4-29
ffnext console environment
variable
, 4-29
Fibre Channel
configuring hardware
, 4-1
displaying available boot devices
,
4-25
fabric mode, 4-3
labeling disks, 4-32
NVRAM, 4-3
NVRAM read failed message
, 4-4
setting topology, 4-4
switch installation
, 4-2
verifying topology, 4-3
Fibre Channel adapter
installing
, 4-2
obtaining the worldwide name of,
4-7
setting to run on fabric, 4-3, 4-4
worldwide name, 4-7
Fibre Channel I/O module, 1-2, 4-2
Fibre Channel switch
installation
, 4-2
overview, 4-2
file
/var/adm/messages
, 4-7
H
hardware configuration
Fibre Channel host bus adapter
,
4-3
verifying FCA topology, 4-3
hwmgr command
-view dev
, 4-30, 4-31
I
init command
, 4-5, 4-30
initializing
after setting bootdef_dev console
environment variable
, 4-30
after using wwidmgr, 4-5
installation
Fibre Channel adapter
, 4-2
L
labeling installation disks
, 4-32
M
Model 4314R disk enclosure
, 1-2
Model 4354R disk enclosure, 1-2
Modular Smart Array 1000
( See MSA1000 )
MSA SAN switch 2/8
, 1-2
MSA1000
1-Gb and 2-Gb compatible
, 1-2
active/passive mode, 2-3, 3-7
adding a spare disk, 4-17
changing the connection name,
4-12
changing the prompt, 4-11
changing the unit ID, 4-19
creating access control list, 4-20
Index-2