Technical data

Example 4-14: Creating an Access Control List for TruCluster Server
Storage Units
MSA1000-1> ADD ACL CONNECTION=swiss-emx0 UNIT=1-7
1
Enabling ACL. Allowing 10000000-C927242E access to unit 1 2 3 4567.
MSA1000-1> ADD ACL CONNECTION=swiss-emx1 UNIT=1-7
2
Enabling ACL. Allowing 10000000-C9272E67 access to unit 1 2 3 4567.
MSA1000-1> ADD ACL WWPN=10000000-C92C2C81 UNIT=1-7
3
Enabling ACL. Allowing 10000000-C92C2C81 access to unit 1 2 3 4567.
MSA1000-1> ADD ACL WWPN=10000000-C92C2C10 UNIT=1-7
4
Enabling ACL. Allowing 10000000-C92C2C10 access
to unit 1 2 3 4567.
1 Use the connection name to provide access to storage units 1-7 for
Fibre Channel host bus adapter emx0 on member swiss.
2 Use the connection name to provide access to storage units 1-7 for
Fibre Channel host bus adapter emx1 on member swiss.
3 Use the port WWN to provide access to storage units 1-7 for Fibre
Channel host bus adapter emx0 on member rye.
4 Use the port WWN to provide access to storage units 1-7 for Fibre
Channel host bus adapter emx1 on member rye.
11. Use the SHOW ACL CLI command as shown in Example 4-15 to verify
that the ACL provides access to only the TruCluster Server member
systems for the cluster storage units.
Example 4-15: Verifying the Access Control List
MSA1000-1> SHOW ACL
ACL is enabled:
Connection WWPN Units
swiss-emx0 10000000-C927242E 1, 2, 3, 4, 5, 6, 7
swiss-emx1 10000000-C9272E67 1, 2, 3, 4, 5, 6, 7
rye-emx0 10000000-C92C2C81 1, 2, 3, 4, 5, 6, 7
rye-emx1 10000000-C92C2C10 1, 2, 3, 4, 5, 6, 7
Inaccessible Units: None
Preparing the MSA1000 for TruCluster Server Use 4-21