Technical data

4.9.1
Set the Device Unit Number ...................................
4-22
4.9.2
Displaying Valid Boot Devices .................................
4-25
4.10
Installing the Software ...............................................
4-27
4.10.1
Install the Base Operating System ............................
4-27
4.10.2
Reset the bootdef_dev Console Environment Variable ..... 4-28
4.10.3
Determining /dev/disk/dskn to Use for a Cluster
Installation ........................................................
4-30
4.10.4
Label the Disks to Be Used to Create the Cluster .......... 4-32
4.10.5
Install the TruCluster Server Software and Create the
First Cluster Member ........................................... 4-32
4.10.6
Add an Additional System to the Cluster .................... 4-32
A Worldwide Names, File System, Unit Number, Unit ID, Device
Name, and Disk Name
Index
Examples
4-1
Verifying Fibre Channel Host Bus Adapter Topology ........... 4-3
4-2
Correcting NVRAM Read Failed Message and Setting Fibre
Channel Adapters to Run on Fabric ............................... 4-4
4-3
Changing the MSA1000 Controller Prompt ...................... 4-11
4-4
Displaying the MSA1000 Connections ............................ 4-11
4-5
Changing the Connection Profile to Tru64 ........................ 4-13
4-6
Verifying the Change in Connection Name and Profile ......... 4-13
4-7
Using the SHOW UNIT Command to Display Existing LUNs 4-14
4-8
Deleting a LUN ....................................................... 4-14
4-9
Displaying the Installed Disks ...................................... 4-15
4-10
Creating the Storage Units (LUNs) ................................ 4-15
4-11
Adding a Spare Disk .................................................. 4-17
4-12
Displaying Information About the Storage Unit ................. 4-17
4-13
Changing a LUN Unit ID ............................................ 4-20
4-14
Creating an Access Control List for TruCluster Server Storage
Units .................................................................... 4-21
4-15
Verifying the Access Control List ................................... 4-21
4-16
Setting the Device Unit Number for the BOS Installation
Disk ..................................................................... 4-24
4-17
Setting the Device Unit Number for the First Cluster Member
Boot Disk ............................................................... 4-24
4-18
Displaying the wwid and n Console Environment Variables ... 4-26
iv Contents