Technical data

Example 4-5: Changing the Connection Profile to Tru64
MSA1000-1> ADD CONNECTION swiss-emx0 WWPN=10000000-C927242E PROFILE=Tru64
MSA1000-1> ADD CONNECTION swiss-emx1 WWPN=10000000-C9272E67 PROFILE=Tru64
MSA1000-1> ADD CONNECTION rye-emx0 WWPN=10000000-C92C2C81 PROFILE=Tru64
MSA1000-1> ADD CONNECTION rye-emx1 WWPN=10000000-C92C2C10 PROFILE=Tru64
Use the SHOW CONNECTIONS command once again to verify that
the connection name and profile has been changed, as shown in
Example 4-6.
Example 4-6: Verifying the Change in Connection Name and Profile
MSA1000-1> SHOW CONNECTIONS
Connection Name: 〈swiss-emx0〉
Host WWNN = 20000000-C927242E
Host WWPN = 10000000-C927242E
Profile Name = Tru64
Unit Offset = 0
Controller 2 Port 1 Status = Online
Controller 1 Port 1 Status = Online
Connection Name: 〈swiss-emx1〉
Host WWNN = 20000000-C9272E67
Host WWPN = 10000000-C9272E67
Profile Name = Tru64
Unit Offset = 0
Controller 2 Port 1 Status = Online
Controller 1 Port 1 Status = Online
Connection Name: 〈rye-emx0〉
Host WWNN = 20000000-C92C2C81
Host WWPN = 10000000-C92C2C81
Profile Name = Tru64
Unit Offset = 0
Controller 2 Port 1 Status = Online
Controller 1 Port 1 Status = Online
Connection Name: 〈rye-emx1〉
Host WWNN = 20000000-C92C2C10
Host WWPN = 10000000-C92C2C10
Profile Name = Tru64
Unit Offset = 0
Controller 2 Port 1 Status = Online
Controller 1 Port 1 Status = Online
4. Determine if any storage units (LUNs) are defined on this MSA1000.
There may be other systems using this MSA1000, or you may have
Preparing the MSA1000 for TruCluster Server Use 4-13