Technical data

Obtain the Fibre Channel host bus adapter port WWN using the wwidmgr
-show port command as follows:
P00>>> wwidmgr -show port
pga0.0.0.7.0 Link is down.
pgb0.0.0.8.0 Link is down.
[0] 1000-0000-c927-242e
[1] 1000-0000-c927-2e67
______________________ Note _______________________
Use the wwidmgr -show port command before connecting the
Fibre Channel host bus adapters to the Fibre Channel switches.
When executed after the fiber-optic cables are installed, the
wwidmgr -show port command displays all Fibre Channel host
bus adapters connected to the Fibre Channel switch, the Fibre
Channel switch ports, and the controller ports.
Record the port WWN of each Fibre Channel adapter for later use in
Table A-1. Table 4-1 lists the WWNs for the systems used in the examples
in this chapter.
Table 4-1: Fibre Channel Host Bus Adapter Port Worldwide Names
Cluster Member Fibre Channel
Adapter
Port Worldwide Name
emx0
1000-0000-c927-242e
Member 1 (swiss)
emx1
1000-0000-c927-2e67
emx0
1000-0000-c92c-2c81
Member 2 (rye)
emx1
1000-0000-c92c-2c10
______________________ Note _______________________
The examples in this chapter are for a two-node cluster. The
MSA1000 will support four-node clusters.
Preparing the MSA1000 for TruCluster Server Use 4-7