Technical data

About this Guide xix
Configuration Flowchart
A three-part flowchart is shown on the following pages. Refer to these charts while
configuring a new storage subsystem:
■ Figure 1 on page xx shows the start of the configuration process.
■ Figure 2 on page xxii shows how to configure storage with the command line
interpreter (CLI), which is the low-level interface to the controller.
■ Figure 3 on page xxiii shows how to configure storage using StorageWorks Command
Console (SWCC), which is the graphical user interface to the controller.
All references in the flowcharts pertain to pages in this guide, unless otherwise indicated.