User guide

Managing KVM console switches 46
c.
From the right column, select one or more servers from which to remove a user's access rights.
Click Remove.
d. Repeat steps b and c until the right column represents the appropriate server access for this user,
and click OK.
5. Click OK to save the settings and return to the main window, or click Cancel to exit.
Setting user access rights
1. Click Access Rights to select individual servers for that user. The User access rights dropdown list
appears.
2. Select a server in the left column, and click Add.
3. Select a server in the right column, and click Remove.
4. Repeat steps 2 and 3 until the right column represents the appropriate server access for the assigned
user, and click OK.
Deleting a user
1. Select Users.
2. Select a user.
3. Click Delete. The Confirm Deletion dialog box appears.
4. Click Yes to confirm the deletion, or click No to exit the window without deleting the user.
Locking and unlocking user accounts
If the console switch is configured for Local Authentication and a user enters an invalid password five
consecutive times, the Security Lock-out feature temporarily disables that account. If a user attempts to log
in again, an error message appears from the software client application. All local accounts, except the
Override Admin account are subject to this lock-out policy.
An administrator can specify the number of hours (1 to 99) that accounts are locked. When Enable Lock-
outs is not selected, the Security Lock-out feature is disabled, and no users can be locked out.
If an account becomes locked, it remains locked until the number of hours specified in the Duration field
has elapsed, the console switch is power cycled, or an administrator unlocks the local account using the
Unlock function on this panel.