User guide

Serial Session Viewer terminal emulation modes 241
Control sequence Definition Encode/Decode
Esc [ Pn c Device attributes No/No
Esc # 8 Screen alignment display No/Yes
Esc # 3 Double height line- top half No/No
Esc # 4 Double height line- bottom half No/No
Esc # 6 Double width line No/No
Esc Z Identify terminal No/No
Esc = Keypad application mode No/No
Esc > Keypad numeric mode No/No
Esc [ Ps q Load LEDs No/No
Esc 8 Restore cursor No/Yes
Esc [ <sol>; <par>; <nbits>;
<xspeed>; <rspeed>;
<clkmul>; <flags>x
Report terminal parameters No/No
Esc [ <sol> x Request terminal parameters No/No
Esc 7 Save cursor No/Yes
Esc [ Pn; Pn r Set top and bottom margins No/No
Esc # 5 Single width line No/No
Esc [ 2; Ps y Invoke confidence test No/No
Esc [ Ps n Device status report No/Yes
Esc [ Ps J Erase in display No/Yes
Esc [ Ps K Erase in line No/Yes
Esc H Horizontal tabulation set No/No
Esc [ Pn; Pn f
Horizontal and vertical
position
No/Yes
Esc D Index No/Yes
Esc E Next line No/Yes
Esc M Reverse index No/Yes
Esc c Reset to initial state No/No
Esc [ Ps; Ps;..;Ps 1 Reset mode No/No
Esc ( A Select character set G0 U.K. No/No
Esc ) A Select character set G1 U.K. No/No
Esc ( B Select character set G0 ASCII No/No
Esc ) B Select character set G1 ASCII No/No
Esc ( 0
Select character set G0 spec.
graphics
No/No
Esc ) 0
Select character set G1 spec.
graphics
No/No
Esc ( 1
Select character set G0 alt.
character ROM standard
character set
No/No
Esc ) 1
Select character set G1 alt.
character ROM standard
character set
No/No