User guide

Serial Session Viewer terminal emulation modes 240
Key Hex code Function mnemonic Encode/decode
Ctrl+V 16 SYN Yes/No
Ctrl+W 17 ETB Yes/No
Ctrl+X 18 CAN Yes/No
Ctrl+Y 19 EM Yes/No
Ctrl+Z 1A SUB Yes/No
Ctrl+[ 1B ESC Yes/No
Ctrl+\ 1C FS Yes/No
Ctrl+] 1D GS Yes/No
Ctrl+- 1E RS Yes/No
Ctrl+? 1F US Yes/No
VT100 ANSI set and reset mode cursor keys
VT100 ANSI set and reset mode cursor keys lists the VT100 ANSI mode and cursor keys for set and reset
modes. Encoding and decoding is supported for all the cursor keys listed.
Cursor key Mode reset Mode set
Up Esc [ A Esc O A
Down Esc [ B Esc O B
Right Esc [ C Esc O C
Left Esc [ D Esc O D
VT100 PF1 through PF4 key definitions
VT100 PF1 through PF4 key definitions lists the VT100 PF1 through PF4 key defintions. Encoding of each
listed key is supported; decoding is not applicable.
Key Code sequence
F1 Esc [ O P
F2 Esc [ O Q
F3 Esc [ O R
F4 Esc { O S
VT100 ANSI mode control sequences
VT100 ANSI mode control sequences lists the ANSI mode control sequences for VT100 terminal
emulation and indicates HP encoding/decoding support, where Yes indicates supported and No
indicates not supported.
Control sequence Definition Encode/Decode
Esc [ Pn; Pn R Cursor position report No/No
Esc [ Pn D Cursor backward No/Yes
Esc [ Pn B Cursor down No/Yes
Esc [ Pn C Cursor forward No/Yes
Esc [ Pn; Pn H Cursor position No/Yes
Esc [ Pn A Cursor up No/Yes