User guide

HP IP Console Switch directory services integration setup tutorial 220
16.
Enter the Group Container CONSOLESWITCHES and test again.
Authentication only
This procedure gives an example of how to use Active Directory for authentication only.
1. Perform steps 2 through 10 from the procedure in "Authentication and group-level access controls
(on page 209)."
2. Enable LDAP, if necessary.
3. Select Use LDAP Authentication Only.
4. Create user accounts locally in the console switch.
IMPORTANT: The console switch user names must match exactly with their user logon name in Active
Directory.
5. Set the access controls for the user locally on the console switch.
6. Test the LDAP communication from the HP IP Console Viewer application.
7. Select Tools>Clear Login Credentials.
IMPORTANT: Perform this step each time you want to test authentication of a user to a target system.