User guide

Upgrading the firmware 206
i.
From the Linux command prompt, enter minicom. As soon as a connection is established, the
Main menu for the console switch appears. Follow the on-screen options to configure the console
switch. The Main Menu with six options appears.
4. Plug the supplied power cord into the rear of the console switch and then into a valid power source,
if not already connected.
5. Power on the console switch, if not already powered on. The activity indicator on the rear panel
powers on. The activity indicator blinks for 30 seconds while performing a self-test. Approximately
10 seconds after it stops blinking, press the Enter key to access the main menu.