User guide
Organizing the system 169
window opens before any login attempt is made to the unit. This feature is useful when debugging a
login script and is usually disabled otherwise.
9. Select or clear the Launch user-specified application option. When enabled, the telnet
application specified in the field below the checkbox will be used.
10. Enter the directory path and name, or click Browse to locate the path and name.
11. Enter command line arguments in the box below the path and name.
12. To insert a predefined macro at the cursor location in the command line, click Insert Macros, and
select a macro from the dropdown list. The HP IP Console Viewer automatically replaces these
variables when the application runs.
13. Select or clear the Launch in command window option. When enabled, the user-specified
telnet application will be launched from within an operating system command window.
14. Click another tab to change additional properties.
-or-
If finished, click OK to save new settings.
-or-
Click Cancel to exit without saving the new settings.
Network tab
The Network tab enables you to change the IP address for the console switch.
1. Select an individual console switch from the selected view.
2. Select View>Properties from the menu bar. The General tab appears.
-or-
Click Properties. The General tab appears.
-or-
Highlight and right-click the console switch, and select Properties. The General tab appears.
3. Click Network.
4. Enter an IP address in the Address: field. This field can contain an IP dot notation or a domain name.
Duplicate addresses are not allowed, and the field cannot be left blank. You can enter up to 128
characters.
5. Click Apply>OK to save the new settings.
-or-
Click Cancel to exit.