User guide

Managing serial console switches 129
1.
Select and entry in the Allowable Managers list, and click Modify. The Allowable Manager dialog
box appears.
2. Modify the entry as needed.
3. Click OK to save the changes.
To delete an allowable manager:
1. Select an entry in the Allowable Managers list, and click Delete. You will be prompted to confirm
the deletion.
2. Click Yes to confirm the deletion.
Adding, modifying, and deleting trap destinations for serial console switches
In the Trap Destinations area, you can specify up to four SNMP trap destinations to which this serial
console switch sends traps. You can also modify and delete existing trap destinations.
To add a trap destination:
1. Click Add. The Trap Destination dialog box appears.
2. Enter the IP address of the trap destination.
3. Click OK to add the trap destination.
To modify a trap destination:
1. Select an entry in the Trap Destination list, and click Modify. The Trap Destination dialog box
appears.
2. Modify the entry as needed.
3. Click OK to save the changes.
To delete a trap destination:
1. Select an entry in the Trap Destinations list, and click Delete. You are prompted to confirm the
deletion.
2. Click Yes to confirm the deletion.