User guide

Managing serial console switches 102
Either plaintext sessions or SSH (or both) must be enabled to launch the Serial Session Viewer. Failure to
have either or both enabled will result in an invalid configuration. Plaintext sessions are enabled by
default.
Specifying a history buffer control
1. Select Sessions.
2. In the History Buffer Control area, select Auto or Hold for the Session Start action. Select Keep or
Clear for the Session End action.
3. Click Apply to save any changes without exiting.
-or-
Click OK to save any changes and exit.
-or-
Click Cancel to exit without saving any changes.
Specifying a session time-out setting
1. Select Sessions.