Specifications

Table 2-4 Computer Setup—Security (continued)
Device Security Allows you to set Device Available/Device Hidden for:
●
Serial ports
●
Parallel port
●
System audio
●
Network controllers (some models)
●
Embedded security device (some models)
●
SATA0
●
SATA1
USB Security Allows you to set Device Available/Device Hidden for:
●
Front USB Ports
◦
USB Port 3
◦
USB Port 4
◦
USB Port 5
◦
USB Port 6
●
Rear USB Ports
◦
USB Port 9
◦
USB Port 10
◦
USB Port 11
◦
USB Port 12
●
Accessory USB Ports
◦
USB Port 1
◦
USB Port 2
Slot Security Allows you to disable any PCI or PCI Express slot
Network Service Boot Enables/disables the computer’s ability to boot from an operating system installed on a network
server. (Feature available on NIC models only; the network controller must be either a PCI
expansion card or embedded on the system board.)
System IDs Allows you to set:
●
Asset tag (18-byte identifier), a property identification number assigned by the company to
the computer.
●
Ownership tag (80-byte identifier) displayed during POST.
●
Chassis serial number or Universal Unique Identifier (UUID) number. The UUID can only be
updated if the current chassis serial number is invalid. (These ID numbers are normally set in
the factory and are used to uniquely identify the system.)
●
Keyboard locale setting (for example, English or German) for System ID entry.
Computer Setup (F10) Utilities
11