Specifications

Removal and Replacement Procedures 2-13
Power Supply Blank
To remove the power supply blank:
1. Unlock the hinge on the cable arm and swing the arm away from the power supply area.
2. Press the locking latch .
3. Pull the blank out of the bay .
1
2
Figure 2-10. Removing the power supply blank
CAUTION: Always populate power supply bays with either a power supply or blank. Operating
the server without installing a power supply or blank results in improper airflow and improper
cooling that can lead to thermal damage.
To replace the power supply blank:
1. Slide the blank into the bay until it locks into place.
2. Swing the cable management arm into place and lock it.