User guide

7-12 Compaq Smart Array 431 Controller User Guide
SCO UnixWare 2.1 or Later
Getting the Driver and
Installation Information
The instructions in this section can be used to retrieve the latest driver and
information necessary to install the initial driver for a new Smart Array 431
Controller installation or to upgrade the driver in an existing UnixWare
server/Smart Array 431 Controller system. If you use SmartStart to install
UnixWare and drivers on a new server, or to upgrade an existing server, you
can skip this section and you do not need to create the EFS diskettes.
The latest drivers and support files for SCO UnixWare as well as information
about installing the driver is located on the Compaq SmartStart and Support
Software CD supplied with the Smart Array 431 Controller Option Kit. To
access these files you will need to create a set of Compaq EFS for SCO
UnixWare 2.1 diskettes from the Compaq SmartStart and Support Software
CD.
Creating the EFS Diskettes
To create the Compaq EFS for SCO UnixWare 2.1 diskettes:
1. Boot the server from the Compaq SmartStart and Support
Software CD.
2. Select Create Support Software from the Compaq System Utilities screen.
3. Select Create Support Software Diskettes from CD only from the
Diskette Builder screen.
4. Scroll down the list and select Compaq SCO OpenServer 5 EFS.
5. Follow the instructions on the screen to create and label diskettes.