User guide

7-6 Compaq Smart Array 431 Controller User Guide
Additional Information
An NTREADME.HLP file on the Compaq SSD for Windows NT diskettes,
contains the latest information about Windows NT, including the driver
installation procedure. Review this information and, where different from the
instructions shown here, use the instructions provided in NTREADME.HLP
file.
To access the NTREADME.HLP file, you need a server running Windows NT
or a PC running Windows. Perform the following steps:
1. Insert the Windows NT SSD diskettes, one at a time, in the diskette
drive.
2. At a command prompt, make A: the current drive and type:
readme.bat
or
From the File pull-down menu in Windows Program Manager, select
Run and enter:
A:\readme.bat
3. Select the help topic(s) to read or print. Important readme files include
Compaq SSD for Windows NT Installation Methods
Using the Compaq SSD for Windows NT Setup Program
Windows NT Device Driver Specifics
Compaq SCSI Controller Support
Compaq Drive Array Support
Installing the Compaq Drive Array Driver during Windows NT
Installation
Installing the Compaq Drive Array Driver after Windows NT
Installation
Updating the Compaq Drive Array Driver
Removing the Compaq Drive Array Driver